Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
IEC60695-11-5 Electrical Safety Test Equipment Stainless Steel Needle Flame Tester
1. Introduction of Needle Flame Tester:
ZY-2 Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material’s ignition risk and fire retardance by a simulation technique the fire.
The shell and important parts of the equipment are made by stainless steel, sculpt daintily, endure smoke corrupt, high automatism, high reliability of key parts of apparatus, numeric shows. Fixture could be adjusted. Test procedure could be controlled automatically.
2. Specification of Needle Flame Tester:
| Burner | Φ 0.5mm ± 0.1mm, outer dia.: ≤Φ 0.9mm Length: 35mm, made by stainless steel. |
| Burner angle | 450 or 900 |
| Application time | 0-999.9s±0.1s adjustable (normally 30s) |
| Burning duration | 0-999.9s±0.1s auto record, manual pause |
| Flame height | 12mm ± 1mm (with height gauge) |
| Burn gas | 95% butane gas |
| Temperature range | 0-10000C |
| Flame requirement | rising time from 100℃±2℃ to 700℃±3℃ should within 23.5s±1s |
| Thermocouple | Φ0.5mm K type thermocouple |
| Experimental background | black background |
| Test period | auto control |
| Standard | IEC60695-11-5 (IEC60695-2-2), GB/T51669.5, GB4706.1 |
| Working dimension | 0.5CBM, made by stainless steel |
| Equipment size | 1000mm(W)*650mm(D)*1300mm (H) |
| Power supply | AC220±10%, 50Hz, 0.3KVA |
3. Pictures of Needle Flame Tester:
