Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
IPX8 High Pressure Water Tank Environment Test Equipment Made by Stainless Steel
Introduction:
IPX8 continuous immersion tank is designed according to IEC60529-2001 regarding the second characteristic numerals 8. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can help to judge the products’ performance, and provide the basis for design, improve and inspect. IP8X test is subject to the agreement between user and manufacturer, the test simulates the condition under 0 to 50m below the water.
Features:
1. For IPX8 waterproof testing
2. The tank body is made by SUS304 stainless steel.
3. Adopts Silicone seals, with feature of good elasticity, and not easy to damage.
4. Equip with cylinder lifting device, stable lift to decrease the pressure during the operation.
5. Equip with safety valve, will auto leak pressure if exceed the rate pressure, to prevent inappropriate operation.
6. Test time setting: 0~999min, auto stop when time up, and auto exhaust, user can open the tank to get out the sample.
7. Pressure display: display the pressure by sensor, and control the pressure by pressure valve.
8. Inlet and outlet is on the bottom of the tank.
Parameter:
| Model | IPX8-A | IPX8-B | IPX8-C | IPX8-D | IPX8E |
| Outer dimension(cm) | 60*78*155 | 60*78*155 | 60*78*175 | 60*78*175 | 70*88*175 |
| Diameter(cm) | 50 | 50 | 50 | 50 | 60 |
| Height(cm) | 50 | 50 | 120 | 120 | 120 |
| Thickness (mm) | 4 | 5 | 4 | 5 | 5 |
| Pressure range | 0-0.3Pa | 0-0.5Pa | 0-0.3Pa | 0-0.5Pa | 0-0.3Pa |
| Max pressure | 0.4Pa | 0.6Pa | 0.4Pa | 0.6Pa | 0.4Pa |
| Test time | 0-999min | 0-999min | 0-999min | 0-999min | |
| Power | 220V, 100W | 220V, 100W | 220V, 100W | 220V, 100W | 220V, 100W |
| Water depth test range | 0-30m | 0-50m | 0-30m | 0-50m | 0-30m |
Picture:
