Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
IEC60884-1 30A Power Load Cabinet used for Plug Socket Life Tester
1. Introduction:
Power Load cabinet is a support equipment designed according to IEC60884-1 and UL1054, it is applied to simulate the electrical appliance in charged state, then to do the aging test and on-off ability test, the load current and surge current can be customized according to the user’s demand. This equipment adopts cabinet type, the shell is made by iron plates with coatings, and with four trundles to move.
2. Parameter:
| Load current | 0~30A (adjustable) |
| Load voltage | 5~300V (adjustable) |
| Power factor | 0.3~0.99 (capacitive: 0.6~0.99) adjustable |
| On-off loop counter | 1~999999 (pre-settable) |
| Rated input voltage | 380V (3 phase) |
| Rated output power | 26KW |
| Power factor | PF=1 |
| Load accuracy | ±5% |
| Output channels | 4 |
| Display mode | display voltage, current, power, power factor at real time |
| Output way | resistive, inductive, capacitive |
| Control mode | manual control |
| Insulation grade | F |
| IP protection grade | IP20 |
| Noise | 65db |
| Protection function | overheat alarm and protection, over-current protection |
| Dimension | 1600mm*500mm*1650mm (W*D*H) |
| Working temperature | -10℃~+50℃ |
| Working humidity | ≦95% |