Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
Test Bar Probe 43 Person Against Access to Hot or Glowing Parts
Introduction:
It is designed according to IEC61032 figure 17. This bar is intended to verify the protection of fixed and portable visibly glowing radiant heaters.
Specification:
| Thickness of probe | 5mm |
| Width of probe | 50mm |
| Length of probe | 80mm |
| Material | metal and insulating material |
Picture:
Probe List:
| Probes and application | Probe code | Short description | Force to be applied |
| Access probes of IEC60529 (IP code) | Probe A | Sphere:Φ50 with handle | 50 |
| Probe B | Jointed test finger | 10 | |
| Probe C | Rod: Φ2.5-length 100 | 3 | |
| Probe D | Wire: Φ1.0-length 100 | 1 | |
| Object probes of IEC60529 (IP code) | Probe 1 | Sphere: Φ50 | 50 |
| Probe 2 | Sphere: Φ12.5 | 30 | |
| Other access probes Persons against access to hazardous live parts or hazardous mechanical parts | Probe 11 | Unjointed test finger | 50 |
| Probe 12 | Cylindrical pin: Φ4-length 50 | ||
| Probe 13 | Conincal pin: Φ3 to 4-length 15 | ||
| Probe 14 | Bar: 3*1 | 20 | |
| Probe 15 | Deleted | ||
| Probe 16 | Deleted | ||
| Probe 17 | Wire: Φ0.5 | ||
| Probe 18 | Small finger probe: Φ8.6-length 57.9 | 10 | |
| Probe 19 | Small finger probe: Φ5.6-length 44 | 10 | |
| Other access probes Persons against access to hazardous mechanical parts | Probe 31 | Cone: Φ110/60 | 50 |
| Probe 32 | Rod: Φ 25 | 30 | |
| Probe 33 | Delected | ||
| Other access probes Persons against access to hot or glowing parts | Probe 41 | Probe: Φ 30 | |
| Probe 42 | Deleted | ||
| Probe 43 | Bar: 50*5 |