Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
IEC60695-11-5 Needle Flame Tester with ISO17025 authorized Third-lab Calibration Certificate
1. Introduction
Needle flame tester is made as per IEC60695-11-5 <Fire hazard testing - Part 11-5 Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance>. The equipment specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials.
2. Features:
2.1 Made by stainless steel structure
2.2 Test procedure could be controlled automatically
2.3 The device supplies a flame which would be controlled by inflicting flame, time and operation procedure of controlled circuit.
2.4 Third-lab calibration certificate authorized by ISO17025 will be provided
3. Specification
| Burner |
Φ 0.5mm ± 0.1mm, outer dia.: ≤Φ 0.9mm Length: 35mm, made by stainless steel. |
| Burner angle | 450 or 900 |
| Application time | 0-999.9s±0.1s adjustable (normally 30s) |
| Burning duration | 0-999.9s±0.1s auto record, manual pause |
| Flame height | 12mm ± 1mm (with height gauge) |
| Burn gas | 95% butane gas |
| Temperature range | 0-10000C |
| Flame requirement | rising time from 100℃±2℃ to 700℃±3℃ should within 23.5s±1s |
| Thermocouple | Φ0.5mm K type thermocouple |
| Experimental background | black background |
| Test period | auto control |
| Standard | IEC60695-11-5 (IEC60695-2-2), GB/T51669.5, GB4706.1 |
| Working dimension | 0.5CBM, made by stainless steel |
| Equipment size | 1000mm(W)*650mm(D)*1300mm (H) |
| Power supply | AC220±10%, 50Hz, 0.3KVA |
