Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
Withstand Voltage Electrical Safety Testing Equipment with 30KV Output
1. Introdcution
AC/DC withstand voltage tester (hipot tester) is a equipment to test dielectric strength, can accurate and fast to test break down voltage, leakage current and other electric safety index. It is meet the requirements of IEC60335, IEC60598-1, IEC60065 and IEC60950.
The model RK2674 series hipot testers are with high output voltage like 0~30KV, 0~50KV, 0~100KV and etc.
2. Features
1). The test voltage up to 5KV with DC and AC test function
2). The output voltage is adjusted by voltage regulator
3). Adopts nixie tubes to display test time, voltage, current and beakdown voltage and current
4). The alarm current value is freely to preset
5). PLC is optional for signal input and output.
3. Parameters
| Model | RK2674B | RK2674-50 | RK2674-100 | RK2674C | ||
| Output voltage |
AC: 0-30KV DC: 0-30KV |
AC:0-50KV; DC:0-70KV |
AC:0-100KV DC:0-140KV |
AC:0-50KV; DC:0-50KV; |
||
| Leakage current |
AC: 0-20mA; DC:0-10mA |
AC: 0-100mA; DC:0-10mA |
AC:0-2/40mA; DC:0-2/20mA |
|||
| Transformer Capacity | 600VA | 5000VA | 10000VA | 2000VA | ||
| Wave sharp | 50Hz/60Hz sine wave | |||||
| Accuracy of voltage | ±5% | |||||
| Accuracy of current | ±5% | |||||
| Time setting | 1~999s | 1s~100h | 1-99s±1% | |||
| Power consumption | ≤30W | |||||
| Power | AC 220V±10% 50Hz/60Hz | |||||
| Accessories | Test cable, power cable, earth cable | |||||
4. FAQ
1) . The output voltage and leakage current range are not we want, do you have other suggetion?
Answer: yes, we have much other models with different output voltage leakage current test range, please write down your demands, we will recommend the best solution for you.
2). Your power plug can not be used in our country, can you change it for us?
Answer; yes, we will change the power plug to fit your demends, please subbmit this issue when you make order.
3). Does this equipment has English operation interface?
Answer: of course, yes, the operation interface has English instruction.
4). Any attentions to use this equipment?
Answer:
● The equipment must well grounded.
● The operator should put on insulating gloves, and the insulation pads should under the feet. And the operator can not metal jewelry.
● The voltage adjusting knobe must contrarotate to the end (min) before power on.
● Make the equipment in reset state before preset the values.
● Do not touch the equipment under test and the test leads
● In case of accident, the power should be cut off immediately
● Indicator light or alarm failure should be repaired immediately
● Forbiden to use this equipment on live circuit or on live equipment
5). What is your warranty period of the equipment?
Answer: the warranty period is 12 months upon buyer receipt of the goods.
5. Competitive advantages
1). PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.
2). Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers within 24 hours