Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
220V 50Hz Salt Spray Test Chamber Lab Testing Machine Equipped with CNAS Calibration Certificate
1. Introduction of Salt Spray Test Chamber
Salt spray test chamber is applied to measure the reliability of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to different standards (JIS, ASTM, CNS, GB), neutral salt mist (NSS) and acidy salt spray test (CASS). This equipment can meet the requirements of the both.
2. Principle of Salt Spray Test Chamber:
Absorb the salt water by Bernoulli principle, and the salt water will be atomized by nozzle symmetrically, no block, no crystallize. The heater in the chamber keep the temperature.
3. Structure and material of Salt Spray Test Chamber:
1) The chamber adopts PVC board, the thickness is 5mm, can bear 80℃.
2) The transparent lid is made by Acrylic board, the thickness is 6mm.
3) The saturated air barrel is made by SUS#304 stainless steel.
4) The test rack can be freely to adjust the angle.
4. Protection Device of Salt Spray Test Chamber:
1) Power off @ low water
2) Power off @ over heat
3) With alarming indicator
5. Parameter of Salt Spray Test Chamber
| Model | PG-SSC-60A | PG-SSC-90A | PG-SSC-120A |
| Standards | JIS, ASTM, CNS and GB standard | ||
| Test chamber capacity (L) | 108L | 270L | 480L |
| Test Chamber Temp. | NSS. ACSS 35℃±1℃/CASS 50℃±1℃ | ||
| Air Cylinder Temp. | NSS.ACSS 47℃±1℃/CASS 63℃±1℃ | ||
| External/Inner Material | PVC & PP | ||
| Safety Devices | Overheating prevention circuit-breaker, dehydration and overheating prevention mechanism, breakdown indicator light | ||
| Test Chamber Size | 600x450x400mm | 900x600x500mm | 1200x800x500mm |
| Volume | 1070x580x1030mm | 1380x800x1150mm | 1700x950x1210mm |
| Power | AC 220V, 1.5KW, 50Hz | AC220V, 3KW, 50Hz | |
| Spray Quantity | 1.0-2.0ml/80cm2/h | ||
| PH | Salt 6.5-7.2, Cu(CHCOOH) 3.0-3.2 | ||
6. FAQ:
1. What is the warranty period of the salt spray test chamber?
Answer: the salt spray test chamber warranty is 12 months upon you receipt of the equipment
2. Can you provide third-lab calibration certificate?
Answer: Yes, the salt spray test chamber can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.
3. Does the salt spray test chamber has English operation interface?
Answer: of course, yes, the operation interface has English instruction.
4. Your power plug can not be used in our country, can you change it for us?
Answer: yes, we will change the power plug to fit your demends, please subbmit this issue when you make order.
7. COMPETITIVE ADVANTAGE
1. PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.
2. Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.
3.Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4. After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.
5. Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.
6. Prompt Response to Customers: we promise to reply our customers within 24 hours
