Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
1mm IP40 Test Probe Wire Equipped with 42V Electrical Indicator IEC60529
1. Standard of IP40 Test Probe Wire
IEC61032 and IEC60529 etc.
2. Test Sample of IP40 Test Probe Wire:
Easily accessible enclosure live parts or mechanical parts.
3. Introduction of IP40 Test Probe Wire:
The IP40 Test Probe Wire is used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Meets IEC and EN Standards including IEC 60529 for IP4 and suffix D codes.
4. Application of IP40 Test Probe Wire:
The IP40 Test Probe Wire can be used for enclosure protection test when open threaded hole of M6 at the end of the handle, the hole can be connected with pull and push gauge. The test wire also can be used for anti-electric shock test when equipped with 42V electrical indicator.
5. Specification of IP40 Test Probe Wire:
| Length of test wire: | 100mm | Diameter of test wire: | 1mm |
| Diameter of stop sphere: | 35mm | Diameter of handle: | 10mm |
| Length of handle: | 100mm | ||
| Material: Insulation material (handle, stop sphere), metal (test wire) | |||