Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
10KV Impulse Withstand Voltage Generator 1.2μs/50μs Voltage Wave
1. Introduction
The impulse withstand voltage generator is a voltage wave tester with a waveform of 1.2μs/50μs. The frontier time is 1.2μs and the half-peak time is 50μs. It conforms to the standards of IEC 60335 and IEC60950 standard, GB/T 17215-1998, GB 7251.1-1997 8.2, IEC60060, IEC1036: 1996, GB/T 16916.1, GB/T 16917.1, GB/T 14048.1-2001 and etc.. The equipment is used to detect the ability of watt-hour meters, low-voltage electrical components to withstand transient over-voltages, and the Electrical clearance and creepage distance. The test voltage is up to 10KV/12KV/15KV.
2. Features:
1) 7 inch LCD touch screen with multifunction, easy to operation and update software
2) Built in over-voltage, over-current, short circuit protection
3) Voltage error and no output warning
4) Chinese and English software available
3. Technical Parameters:
| Open output voltage | 12KV (max)±5% |
| Frontier time | 1.2μs ±30% |
| Half-value time | 50μs ±20% |
| Output polarity | positive, negative, positive/negative automatically |
| Output impedance (optional) | 2Ω,500Ω±10% |
| Test times | 1~9999 times |
| Surge interval | 3~999s |
| Working environment | 15℃~35℃ (temperature), 10%~75% (humidity) |
| Working power | 220V±10% AC, 50/60Hz |
| Dimension | 470mm*260mm*500mm (W*H*D) |
| Weight | 35KG |
4. Picture
FAQ:
1). What is the warranty period of the equipment?
Answer: the equipment warranty is 12 months upon you receipt of the equipment
2). Can you provide third-lab calibration certificate?
Answer: Yes, the equipment can send to the third-labs authorized by ISO17025 and get the calibration certificate, but the buyer should undertake the charges.
3). Does this equipment has English operation interface?
Answer: of course, yes, the operation interface has English instruction.
4). What is the working power of the equipment?
Answer: AC 220V±10%, 50Hz/60Hz