Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
IEC60811 Figure 1 Indentation Device for Testing Cable Insulation Sheaths
1. Introduction
The indentation device is designed according to IEC60811-508:2012 figure 1, the device is consisted by blade, supporting mandrel and loads.It is applied to test the indentation produced by the insulation sheath of the plug or cable under high temperature and pressure, the device should work with oven.
2. Parameter
| Test station | 3 |
| Blade thickness | 0.7±0.01mm |
| Blade width | 30mm±0.1mm |
| Load | 1g*3, 2g*3, 5g*3, 10g*3, 20g*3, 50g*3, 100g*3, 200g*3, 500g*3, 1000g*3 Made of stainless steel |
| Application | ≥0.4mm and ≤55mm insulation sheath |
| Supporting mandrel | Flat plate, 900 V slot plate, 1200 V slot plate |
| Weight tray | Diameter φ100mm |
| Material of device | SUS304 |
| Dimension | 400mm*220mm*330mm |
| Weight | Approximate 20kg |
3. Picture
