Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
Multiplex Temperature Meter for Temperature Rising Test
1. Introduction
Multiplex temperature tester is a equipment that can simultaneously monitor multiple channel temperatures. Equip with 5-inch LCD screen, the upper and lower limit can be preset for alarming, display and record the temperature of each channel at real time, the column graph and temperature change graph can visually show the temperature change of each channel.
2. Specification
| Model | TCP-8X | TCP-16X | TCP-24X | TCP-32X | TCP-40X | TCP-48X | TXP-56X | TCP-64X |
| Test channel | 8 | 16 | 24 | 32 | 40 | 48 | 56 | 64 |
| Touch screen | 7-inch, LCD | |||||||
| Display accuracy | 0.2℃±2 digit | |||||||
| Temperature sensor | K type | |||||||
| Temperature test range | -50℃~1300℃ | |||||||
| Alarming function | Upper and lower limit can be preset for alarming, and support on real time record | |||||||
| Column graph | The real-time temperature is displayed in the form of a bar graph, and the temperature value of each channel can be compared more clearly and intuitively. | |||||||
| temperature change graph | The real-time temperature can be tracked as a changing graph, and support on settings for X and Y axis values automatically or manually | |||||||
| Temperature units | K, 0F, 0C | |||||||
| Operation language | Chinese-English switchable | |||||||
| Performance | 32-digit ARM micro-processor, response time less than 0.5s | |||||||
| Anti-interface | Each channel is isolated from each other, anti-high frequency interference, the peak value of isolation voltage can reach 2500V | |||||||
| Storage capacity | 8G | |||||||
| Data protection | the data can be stored for 72 hours to 180 days, and will not lose when emergency shut down | |||||||
| U disk | Support U disk to export the storage data | |||||||
| Temperature compensation | each channel supports temperature compensation and provides multiple compensation modes | |||||||
| Mark function | Each channel can be named arbitrarily | |||||||
| Sampling interval | 100ms (H), 500ms (Middle), 1s (Low) | |||||||
| Interface | USB 2.0 | |||||||
| Working power | AC85V-265V, 50Hz/60Hz | |||||||
| Dimension | 215mm*300mm*100mm (L*W*H) | |||||||
3. Frequently Asked Questions
1). How to install the temperature sensors?
Pego: The temperature sensor interfaces are on the back of the meter. The user can select the number of test channels, a group temperature sensor includes 8 channels, user can select 8 group at most.
2). What temperature sensors can this device support?
Pego: This meter support K, S, R, N, E, J, T, B types thermocouple. Besides, platinum resistances such as PT100, PT1000, Cu50 are supported also.
3). What functions does this device have?
Pego: Users can name and select colors for each channel, and can output bar graphs and curve graphs for easy analysis and comparison; they can zoom in and out on the curve graph to observe a certain point. At the same time, each channel can set upper and lower alarm limits and display the temperature value of each channel.
4). Does this meter can work with black test corner?
Pego: Of course yes.