Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
The IPX3 and IPX4 Ingress Protection Testing Machine, named as Oscillating Tube Waterproof tester, is designed and manufactured according to IEC60529 clause 14.2.3 and 14.2.4, IEC60598-1, GB4208, and GB7000.1 standards. It is suitable for waterproof testing of outdoor electrical and electronic products and lamp housings in all directions of rain and splashing. It is suitable for certification and testing agencies and manufacturers to test the waterproofness of products. This equipment can manually control the flow rate through the glass rotor or control the flow rate through the digital sensor. The 7-inch color touch screen displays, controls, and sets the test program. Users can easily and simply reach the test conditions. This tester is not equipped with a shower head, and the shower head needs to be equipped with equipment separately.
IEC60529 Degrees of protection provided by enclosures (IP Code) clause 14.2.3 and clause 14.2.4 Figure 4
IEC60598-1 Luminaires - Part 1: General requirements and tests
| Model | IPX34C | |||||||
| Tube Radius | R1600 | R1400 | R1200 | R1000 | R800 | R600 | R400 | R200 |
| Outer size (L*W*H, m) | 4*3.2*2.8 | 3.6*3*2.6 | 3.2*2.4*2.4 | 2.85*2.02*2.350 | 2.4*1.8*2 | 2*1.4*1.8 | / | / |
| Delivery rate (L/min) | 0~10 | 0~10 | 0~6 | 0~6 | 0~4 | 0~3 | / | / |
| Diameter of turntable (mm) | Φ1000 | Φ1000 | Φ800 | Φ800 | Φ600 | Φ600 | / | / |
| Height of turntable (mm) | 1750~2350 | 1750~2350 | 1350~1950 | 1300~1700 | 950~1550 | 550~1000 | / | / |
| Aperture of nozzles (mm) | 0.4 | |||||||
| Inner diameter of tube | 15mm | |||||||
| Water tank capacity | 30L | |||||||
| Tube angle | 1200 (IPX3), 3600 (IPX4) or user-defined | |||||||
| Rotation speed of tube | 4s for 2*1200, 12s for 2*3600 or user defined | |||||||
| Material of tube | SUS304 stainless steel | |||||||
| Rotation speed of turntable | 1~5r/min | |||||||
| Max. load-bearing capacity of turntable | 50KG | |||||||
| Turntable rotation method | Forward or forward and reverse alternation | |||||||
| Protection | Electric leakage, hydropenia, short circuit | |||||||
| Working power | AC 220V/50Hz, 1KW (Live wire + neutral wire + protective ground wire) | |||||||
| Working conditions | 5℃~35℃ (temperature), ≤85% (R.H.), 86kPa~106kPa (pressure) | |||||||
| Accessories | Water filter*1, test needle*100, 3-core cable*1 (3m) | |||||||
| Water source | 1).The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet. 2).The faucet is not more than 2 meters away from the equipment | |||||||
| Requirement for the site | The ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set | |||||||
| Requirement for power switch | 1). The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and this switch must be independent for the use of the equipment 2). It is forbidden to use knife switches or power sockets 3).The leakage protection air switch is not more than 2 meters away from the equipment | |||||||
| Radius (mm) | IPX3 | IPX4 | ||||
| Number of open holes | Total water flow | Number of open holes | Total water flow | |||
| L/min | L/h | L/min | L/h | |||
| 200 | 8 | 0.56 | 33.6 | 12 | 0.84 | 50.4 |
| 400 | 16 | 1.1 | 66 | 25 | 1.8 | 108 |
| 600 | 25 | 1.8 | 108 | 37 | 2.6 | 156 |
| 800 | 33 | 2.3 | 138 | 50 | 3.5 | 210 |
| 1000 | 41 | 2.9 | 174 | 62 | 4.3 | 258 |
| 1200 | 50 | 3.5 | 210 | 75 | 5.3 | 318 |
| 1400 | 58 | 4.1 | 246 | 87 | 6.1 | 366 |
| 1600 | 67 | 4.7 | 282 | 100 | 7.0 | 420 |
4.1 What parts does the ipx3 and ipx4 oscillating tube ingress protection testing machine consists of?
Pego: The ipx3 and ipx4 oscillating tube ingress protection testing machine consists of the control system, frame, swing tube, needles, turntable, flowmeter, pressure gauge and etc.
4.2 Will any replacement be deliveried together with the machine?
Pego: Yes, we have prepared extra 100pcs needle and one water filter for the machine.
4.3 How many pcs swing tube does it include?
Pego: We have the R200, R400, R600, R800, R1000, R1200, R1400 and R1600 swing tubes for selection. The size of the swing tube depends on the sample size of the specimen. Normally we will provide one piece swing tube, but it also can be specified by users.
