Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
The IPX8 Immersion Tank Ingress Protection Testing Machine is designed and manufactured according to IEC60529, IEC60598-1 Section 9.2.9, and is suitable for waterproof testing of outdoor electrical and electronic products and lighting products under water, and for waterproof testing of products by certification and testing agencies and manufacturers. The IPX8 immersion tank tester mainly uses a high-pressure stainless steel water tank, and simulates the underwater pressure through external pressurization to meet the test requirements.
IEC60529 Degrees of protection provided by enclosures (IP Code) clause 14.2.8
IEC60598-1 Luminaires - Part 1: General requirements and tests
| Tank outer size | 775 *850*1750mm (L*W*H) |
| Tank inner size | φ600*1200mm (Diameter*H) |
| Wall thickness | 4mm |
| Tank material | SUS304 stainless steel |
| Flange thickness | 25mm |
| Flange material | stainless steel |
| Weight: | About 150KG |
| Open mode | Cylinder lifting |
| Pressure control mode | auto adjustment |
| Pressure sensor error | ±0.002 Mpa |
| Pressure sensor accuracy | 0.001Mpa |
| Water depth range | 0~50m |
| Pressure adjustment range | 0.00~0.5Mpa |
| Safety valve discharge pressure | 0.55Mpa |
| Max pressure | 0.6Mpa |
| Test time | 0~999min |
| Protection device | pressure safety valve protection, leakage protection |
| Air intake adjustment | Manual adjust the pressure valve. |
| Working power | 220V/50Hz, 100W |
| Working condition | 5℃-35℃ (RT.), ≤85% (RH.), 86kPa~106kPa (pressure) |
| Water source | Tap water or pure water |
| Air source | User-supplied air compressor, suggest output pressure: 0.6Mpa-0.8Mpa |
| Accessories | Auxiliary steel rod, water pipe (5m), air inlet pipe*1 |
