Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Add to Cart
The universal spring hammer is fully designed as per the requirements of IEC61010-1 clause 8.2.2, IEC60068-2-75 and GB/T2423.55, IEC60598-1 clause 4.13.1 and IEC60335-1 clause 21.1. It is suitable for shell strength testing of information technology products and is used by certification and testing organizations and manufacturers to inspect product shells.
- IEC60598-1 Luminaires–Part 1: General requirements and tests clause 4.13.1, includes 0.2J, 0.35J, 0.5J, and 0.7J spring operated hammer,
- IEC60068-2-75, GB/T2423.55 Environmental testing - Part 2-75: Tests - Test Ehb: Spring Hammer,
- IEC60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements clause 21.1, includes 0.5J spring hammer,
- IEC61010-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance clause 8.2.2.
| Model | Impact Energy |
| IK-SH01 | 0.14±0.01J |
| IK-SH02 | 0.20±0.02J |
| IK-SH03 | 0.35±0.03J |
| IK-SH04 | 0.50±0.04J |
| IK-SH05 | 0.70±0.05J |
| IK-SH06 | 1.00±0.05J |
| IK-SH07 | 2.00±0.10J |
| IK-SH08 | 5.00±0.25J |
| IK-USH | 0.14J, 0.20J, 0.35J, 0.50J, 0.70J, and 1.00J, adjustable |
| IK level | IK01, IK02, IK03, IK04, IK05 and IK06 |
| Impact energy | 0.14J, 0.5J, 0.35J, 0.50J, 0.70J and 1.00J |
| Error | ±10% |
| Equivalent mass | 250g±5g |
| Radius of hammer | R10mm |
| Weight | 1250g |
| Trigger force | ＜10N |
| Material of hammer | Polyamide |
| Material of shell | Stainless steel |